Shares:834088
News

News

Location:Home >> News >> Company News

Reinstall the points for attention during the hydraulic motor

液压马达

Hydraulic motor when heavy, need to pay attention to the following points:
1, at the time of removal of the motor, to dismantle the tubing, and position of oil on the oil pump and tubing to interface sealed immediately, to ensure that no dust and so on into the pipe after the meeting;
2, install the motor, must be "stable", rather than a "quick";
3, after waiting for tubing all installed, will in the motor of air discharge;
4, after the installation, to motor adding suitable amount of new clean the hydraulic oil;
5, check the oil motor, idle speed idling about ten minutes, see if any oil leakage phenomenon;
6, slow operation lever in one direction makes mixing drum at a slower feed direction 20 minutes;
7, the joystick back in the middle of the position, after mixing stop will be the use of oil filling can be back to normal.
Above is the matters needing attention about heavy hydraulic motor, the content is provided by hengtong hydraulic co., LTD., ningbo hengtong hydraulic co., LTD., specializing in the production of hydraulic motor, the country ordering website: www.helmtower.com

About Us Products Service News

Ningbo?Helm?Tower?Noda?Hydraulic?Co.,Ltd

Address:No.1818 Zhenluo East Road. Zhenhai,Ningbo, China PC code:315207

Tel:0086-574-86361510

Mobile:0086-13567904566

Fax:0086-574-86369630

Web:http://www.hydraulics-china.com

Email:sales@hydraulics-china.com

Company profile Enterprise culture Enterprise idea Office environment Honor and Qualification Equipment Job MS, MCR motor series MS, MCR accessories Vane motor Milling series Milling accessories Hydraulic winch Plunger pump series Video Download Message Company News Industry Information
Copyright ? 2021 Ningbo?Helm?Tower?Noda?Hydraulic?Co.,Ltd All Rights Reserved. Technical Support:Langteng Design
XML 地图 | Sitemap 地图